Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product DownloadsLED arrays provide consistent illumination across available color temperatures from 2700K to 5000K. Standard 80+ CRI with optional 90+ CRI, including enhanced red rendering. Color consistency maintained within 3 SDCM.
The Sharp Edge Downlight creates dramatic impact by limiting light spread outside the primary beam. A molded conical reflector redirects light from each emitter into the desired beam angle, while a 0.5″ reflective square louver provides cutoff with a UGR of 10. Three different TIR elements offer a choice of beam spreads: 15° spot (SPT), 30° flood (FLD), or 45° wide flood (WFL).
Soft Edge Downlight blends light into darker areas for a gentle brightness transition. Each LED emitter directs light through a custom-molded circular optic using total internal reflection (TIR) to shape the beam. A 0.5″ reflective square louver provides cutoff with a UGR of 10, and three TIR elements allow selectable beam spreads: 25° Narrow Flood (NFL), 35° Flood (FLD), or 55° Wide Flood (WFL).
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product Downloads
Single-channel dim-to-warm control adjusts color temperature as light levels decrease. Transitions from 3500K to 2200K.
Two-channel tunable white control allows adjustment of color temperature across a defined range to support varying lighting requirements throughout the day.
Parabolic louver optics provide excellent shielding and a pleasing crisp visual texture. The parabolic contour of the blades and side reflectors direct light into a comfortable downlight distribution, while minimizing shadows from the LED array above each cell. Four finishes are available. Specular Aluminum (SPL), Matte Aluminum (MPL), Matte White (WPL) and Matte Black (BPL).
Matte Black
Matte Aluminum Parabolic Louver
Specular Aluminum
Matte White
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product DownloadsLED arrays provide consistent illumination across available color temperatures from 2700K to 5000K. Standard 80+ CRI with optional 90+ CRI, including enhanced red rendering. Color consistency maintained within 3 SDCM.
Wall Wash Reflector Optics (WRO) – Clusters of Linear Wall Wash optics use multiple mid-flux emitters in a continuous array, supported by an angled board. An aluminum reflector collects and redirects emitter flux, while a refractive film adjusts both vertical and horizontal intensity and eliminates the source image. The result is excellent uniformity up and down the wall, as well as between luminaires.
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product DownloadsLED arrays provide consistent illumination across available color temperatures from 2700K to 5000K. Standard 80+ CRI with optional 90+ CRI, including enhanced red rendering. Color consistency maintained within 3 SDCM.
The Sharp Edge Downlight creates dramatic impact by limiting light spread outside the primary beam. A molded conical reflector redirects light from each emitter into the desired beam angle, while a 0.5″ reflective square louver provides cutoff with a UGR of 10. Three different TIR elements offer a choice of beam spreads: 15° spot (SPT), 30° flood (FLD), or 45° wide flood (WFL).
Soft Edge Downlight blends light into darker areas for a gentle brightness transition. Each LED emitter directs light through a custom-molded circular optic using total internal reflection (TIR) to shape the beam. A 0.5″ reflective square louver provides cutoff with a UGR of 10, and three TIR elements allow selectable beam spreads: 25° Narrow Flood (NFL), 35° Flood (FLD), or 55° Wide Flood (WFL).
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product DownloadsLED arrays provide consistent illumination across available color temperatures from 2700K to 5000K. Standard 80+ CRI with optional 90+ CRI, including enhanced red rendering. Color consistency maintained within 3 SDCM.
The Sharp Edge Downlight creates dramatic impact by limiting light spread outside the primary beam. A molded conical reflector redirects light from each emitter into the desired beam angle, while a 0.5″ reflective square louver provides cutoff with a UGR of 10. Three different TIR elements offer a choice of beam spreads: 15° spot (SPT), 30° flood (FLD), or 45° wide flood (WFL).
Soft Edge Downlight blends light into darker areas for a gentle brightness transition. Each LED emitter directs light through a custom-molded circular optic using total internal reflection (TIR) to shape the beam. A 0.5″ reflective square louver provides cutoff with a UGR of 10, and three TIR elements allow selectable beam spreads: 25° Narrow Flood (NFL), 35° Flood (FLD), or 55° Wide Flood (WFL).
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product Downloads
Single-channel dim-to-warm control adjusts color temperature as light levels decrease. Transitions from 3500K to 2200K.
Two-channel tunable white control allows adjustment of color temperature across a defined range to support varying lighting requirements throughout the day.
Parabolic louver optics provide excellent shielding and a pleasing crisp visual texture. The parabolic contour of the blades and side reflectors direct light into a comfortable downlight distribution, while minimizing shadows from the LED array above each cell. Four finishes are available. Specular Aluminum (SPL), Matte Aluminum (MPL), Matte White (WPL) and Matte Black (BPL).
Matte Black
Matte Aluminum Parabolic Louver
Specular Aluminum
Matte White
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Cluster Combinations integrate miniature downlighting elements and linear HLO lighting within a narrow, 1.5″ extruded channel. Compatible optics include downlight, parabolic, and wall wash options in 3-, 5-, and 10-cell configurations, with all applicable beam spreads and aperture finishes. Cluster Combinations can run any length from 4’ onward and can be recessed, surface-mounted, or pendant-mounted with on-board drivers.
Product DownloadsLED arrays provide consistent illumination across available color temperatures from 2700K to 5000K. Standard 80+ CRI with optional 90+ CRI, including enhanced red rendering. Color consistency maintained within 3 SDCM.
Wall Wash Reflector Optics (WRO) – Clusters of Linear Wall Wash optics use multiple mid-flux emitters in a continuous array, supported by an angled board. An aluminum reflector collects and redirects emitter flux, while a refractive film adjusts both vertical and horizontal intensity and eliminates the source image. The result is excellent uniformity up and down the wall, as well as between luminaires.
Soft-Edge Downlights:
Sharp-Edge Downlights:
Louver is injection molded with integral texture and color.
Very small sources of light can diminish visual comfort. The Universal Glare Rating (UGR) model assesses the glare from an installation of luminaires, based on the number and light distribution of the luminaires and the parameters of the space.
Ratings range from 5 to 40; lower ratings are better. As the table shows, Cluster downlights achieve a UGR of 11-18*, which is very comfortable and suitable for applications such as conference rooms, hospitality, and boutique retail.
| Parameter | Option 1 | Option 2 | Option 3 | Option 4 | Option 5 | Option 6 |
|---|---|---|---|---|---|---|
| Optic | Parabolic | Parabolic | Sharp Edge | Sharp Edge | Soft Edge | Soft Edge |
| Louver | SQR | SQR | CON | HYP | SQR | SQR |
| Finish | SPL | MPL | GL06 | GL06 | BL05 | MF01 |
| Beam Spread | 57° | 62° | 45° | 45° | 55° | 55° |
| UGR | 11 | 12 | 12 | 12 | 14 | 18 |
Clusters are available in 2700K, 3000K, 3500K, and 4000K, all with 90 CRI, providing rich color rendering. Tight color consistency is maintained within 2 SDCM.
Clusters with parabolic louvers are also available with ChromaWerx Sola and Duo. Sola provides a dim-to-warm effect, warming color temperature in a predetermined relationship as output dims. Duo provides a tunable white effect, with independent control of color temperature and light output. See specification sheets for details.
From illuminating retail and residential projects, to human-centric lighting for schools and offices, explore our recent projects and learn how purposeful, intentional lighting can transform any space.
We’d love your feedback on the new Lumenwerx website. This short survey takes about 30–60 seconds and helps us understand what you came to do, whether you were successful, and how we can improve the experience.
When you submit this form, it will not automatically collect your details like name and email address unless you provide it yourself.
